blank
 

Single Stage Rotary Vane Vacuum Pump


A Rotary Vane Vacuum Pump works on the principle of positive eccentrically mounted rotor in the housing. Being a positive displacement type pump, it gives pre-determinable volumetric flow rate. With a pumping speed ranging from 28 m3 / hr to 635 m3 / hr it provides ultimate vacuum between 0.1 torr to 0.05 torr. Tekman India offers European make Single Stage Rotary Vane Vacuum Pump which is not only robust but also is compact in design. Its direct drive system ensures low noise level, low vibrations and can be continuously run from atmospheric pressure to ultimate vacuum. Direct driven motor tends to lower the power consumption which gives a significant cost benefit. In addition to this, our Rotary Vane Pump has an integrated exhaust filter and built-in anti-suck back valve which provides protection to the Vacuum Pumping System in case of power interruption / failure.

The TSV series of Rotary Vane Vacuum Pumpsare air-cooled design. It is designed to operate continiously at higher operating pressure upto 350 mbar. The pumps are supplied with built in Gas ballast facility which helps it to handle high amount of water vapours. The innovative design delivers stable pumping speed and consistant vacuum performance made it customers first choice in various applications.

ENQUIRY FORM

Salient Product Features

  • Pumping speed from 28 m3 / hr to 635 m3 / hr
  • Ultimate Vacuum – 0.1 torr to 0.05 torr
  • Continuous operating vacuum below 350 mbar.
  • High water vapour tolerance
  • Air Cooled design
  • Integrated exhausted filters
  • Inbuilt anti-suck back valve
  • Low noise level & vibrations
  • Direct drive
  • Robust & compact design


 

Rotary Vane Vacuum Pump catering to multiple segments and applications.

Industry End product manufactured by customer Application Advantages
Electrical Industry Transformer - Current Transformers (CT),Power transformers (PT) Drying (Auto clave), Vapour phase drying (VPD), Evacuation, Oil filling, Bushing, Leak testing
  • Water vapour is the major load for this application and these series of pumps have good water vapour handling capacity with gas ballast at higher operating vacuum.
  • Air cooled design and hence no utility requirement.
  • Compact design, low noise and vibration helps easy integration into trolley mounted evacuation and oil filling machines with suitable oil/liquid trap.
Motor Resin Impregnation
  • Handles resin vapours with suitable resin traps.
Switchgear (SF6 filled switchgear, RMU, GIS) Helium Leak testing, SF6 recovery,
  • Faster evacuation for short cycles. Able to handle frequent change in operating pressure i.e., from atm to 1 mbar or lower.
Oil filtration machines Oil filtration
  • Air cooled, compact design, low noise and vibration helps easy integration into machines.
  • Pumps can handle high water vapour load with gas ballast facility.
Capacitors (Oil filled, Gas filled, SF6 filled capacitors Drying, Oil filling, Leak testing
  • Delivers high vacuum along with booster systems.
Process Industry Pharma(API - Active pharma ingredients, Bulk drugs, Formulation) Freeze Drying, Drying, Distillation, Powder transfer, Central vacuum systems in Labs
  • High vapour handling capacity helps to handle various water vapour and other solvent load.
  • Lower power consumption against conventional technology gives faster ROI on capital investment.
  • Compact design, low noise and vibration helps easy integration into powder transfer, filling line, packaging machines etc.
R&D Industry Space and Aeronautics Space simulation, evacuation, Coating, Leak testing, Heat treatment
  • Used as roughing and backing high vacuum pumps for faster evacuation from atm to 10 mbar.
  • Air cooled design, inbuilt exhaust mist filters, low noise and vibration helps to keep inside the clean facility.
Automobile Industry Auto Ancillaries (Manufacturer of Reflector, Mirror, Halogen, Engine blocks, engine valves, radiator, fuel tanks, Fuel tank hoses, AC hoses, Carburetor) Coating, Evacuation, Leak testing, Heat treatment Evacuation and Transfer
  • Used as roughing and backing high vacuum pumps for faster evacuation from atm to 10 mbar in coating application.
  • Air cooled, compact design, low noise and vibration helps easy integration into machines.
  • Faster evacuation for short cycles. Able to handle frequent change in operating pressure i.e., from atm to 1 mbar or lower in leak testing application.
  • Faster Removal of moisture and air for Oil filling, coolant filling in high speed production lines.

Single Stage Rotary Vane Vacuum Pump: The cost-effective solution for rough vacuum market requirements

Tekman Rotary Vane Vacuum Pump is an excellent choice for applications with high water vapor tolerance. Its air-cooled design ensures low noise levels and vibrations. Our Rotary Vane Pump consumes less power and oil compared to other models which makes it the cost effective solution. Its compact, robust design ensures reliability and cost-effectiveness, making it the perfect choice for demanding applications. It also features integrated exhaust filters and an inbuilt anti-suck back valve, making it suitable for pumping on traces of aggressive vapors. Overall, this vacuum pump provides a affordable & beneficial solution for meeting the rough vacuum market's requirements.


Rotary Vane Vacuum Pump: Integrated with wide ranging accessories

Tekman Rotary Vane Vacuum Pump can be integrated with diverse & multiple accessories that could boost the overall performance & productivity of the product. Tekman offers a fully integrated Rotary Vane Vacuum Pumping System with various accessories to suits requirements of various applications e.g. LCCS - Lubricant Cleaning and Conditioning System, Suction Filters with options to choose from Paper filter, Polyster filter & Carbon filter, Dust Separator with removable bags, Liquid Cyclonic Separator, Liquid Traps for Vacuum Pump, Vacuum Valves, Helicoid Condenser and Control Panel with Automation.


For more information, get in touch with us on +91 72089 14848 | info@tekman.co.in

Tekman India Pvt. Ltd. 434, G.I.D.C Manjusar, Taluka – Savli, Dist. Vadodara, Gujarat– 391775

Board Line : +91 2667 264 237/39/40

close

ENQUIRY FORM

Enquire Now


Call:

+91 72089 14848

+91 2667 264 237/39/40

Location:

TEKMAN INDIA PVT. LTD.

Works
434, G.I.D.C Manjusar, Taluka - Savli, Dist. Vadodara - 391775


Corporate Office
501-C, WiFi IT Park, S.G. Barve Road, Wagle Estate, Thane (West) - 400604 Maharashtra, India


© Copyright 2023, Tekman India Private Ltd. | All rights reserved.


Powered by creative31minds